SPIDER SCREW
Spider Pin
Ø 1,3 mm
Cylindrical Thread (Self-tapping)
Available in lengths 8 – 10 mm.
Spider Pin requires a pre-drill with a special drill bit Ø 0.9 mm. It is recommended to insert with a Torque Driver equipped with a torque meter.
- Simplified head for applying NiTi springs and elastic chains
- Ø 1.3 mm
SPIDER SCREW
Spider Pin
Ø 1,3 mm
Cylindrical Thread (Self-tapping)
Available in lengths 8 – 10 mm.
Spider Pin requires a pre-drill with a special drill bit Ø 0.9 mm. It is recommended to insert with a Torque Driver equipped with a torque meter.
- Simplified head for applying NiTi springs and elastic chains
- Ø 1.3 mm
Indispensable tools
DYNAMOMETRIC SCREWDRIVER
TORQUE DRIVER
6 – 10 N/cm
10 – 15 N/cm
15 – 20 N/cm
DST-1600 TORQUE DRIVER
- Dynamometric screwdriver insertion force control;
- Ability to adjust insertion force from 6 to 20 N/cm;
- Head with universal mechanism for all Spider Screw system rods;
- Entirely metal body for easy cleaning and sterilisation.
Discover the case management portal
HDC and DPRI offer a skeletal anchorage planning service through the dedicated digital portal through the DPRI staff.